The Pass4itsure Exam questions answers covers all the knowledge points of the real exam. We update our product frequently so our customer can always have the latest version of the brain dumps.
The Best Pass4itsure 300-170 Dumps, Real Cisco 300-170 Dumps Download On Sale, Pass DCVAI Implementing Cisco Data Center Virtualization and Automation (DCVAI).
Exam Code: 300-170
Exam Name: DCVAI Implementing Cisco Data Center Virtualization and Automation (DCVAI)
Updated: May 30, 2017
Q&As: 102
Exam Information: http://www.pass4itsure.com/300-170.html
Cisco Exam 300-170 Dumps Blog Series
QUESTION 11 The permanent licenses on the controller will be deleted with the use of which command? A. delete license B. write erase C. Licenses cannot be deleted once activated D. write erase all Correct Answer: D QUESTION 12 Which statement is true about the Content Security License? A. Applied to the master controller B. Applied to all the controllers in the network C. It is based on number of users D. It is based on number of APs
Correct Answer: C QUESTION 13 What is the best practice regarding licensing for a backup master to support Master Redundancy? A. Backup master only requires the AP license B. License limits should be the same on primary master and backup Master C. Licenses are pushed from the primary to the backup Master along with the configuration D. Backup Master does not require licenses to support master redundancy
Correct Answer: B QUESTION 14 Which may be applied directly to an interface? (Choose all the correct answers.) A. Access List (ACL) B. Firewall Policy C. Roles D. RF Plan Map
Correct Answer: AB QUESTION 15 What new firewall action was added specifically for use with Aruba's Content Security Service? VisualRF supports import of floor plans from: A. dst-nat B. dual-nat C. route dst-nat D. redirect to tunnel
Correct Answer: C QUESTION 16 When creating a firewall policy, which of the following parameters are required? (Choose all the correct answers.) A. Destination B. Service C. Source D. Log E. Action
Correct Answer: ABCE QUESTION 17 In all unmodified default AAA profiles, in which default initial role is the user placed? A. trusted-ap B. guest C. pre-guest D. logon
Correct Answer: D
QUESTION 18 When are the system-defined default roles added to the configuration on the controller? A. when the controller is first booted B. when an RF Proctect license is added to the controller C. when created manually D. when a PEF-NG license is added to the controller Correct Answer: D QUESTION 19 When a user first associates to the WLAN, what role are they given? A. the guest role B. the stateful role C. the initial role in the server group profile D. the initial role in the AAA profile
Correct Answer: D QUESTION 20 Which of the following could be used to set a user's post-authentication role or VLAN association? (Choose all the correct answers.) A. AAA default role for authentication method B. Server Derivation Rule C. Vendor Specific Attributes D. AP Derivation Rule Correct Answer: BC QUESTION 21 Which describe "roles" as used on Aruba Mobility Controllers? (Choose all the correct answers.) A. Roles are assigned to users. B. Roles are applied to interfaces. C. Policies are built from roles. D. A user can belong to only one role at a time. Correct Answer: AD
Buy Pass4isture 200-155 Dumps Study Material, Real Cisco 200-155 Dumps Exam Latest Version PDF&VCE, Pass DCICT Introducing Cisco Data Center Technologies.
Exam Code: 200-155
Exam Name: DCICT Introducing Cisco Data Center Technologies
Updated: May 30, 2017
Q&As: 61
Exam Information: http://www.pass4itsure.com/200-155.html
Pass4itsure Cisco Exam 200-155 Dumps Blog Series:
QUESTION 8
With reference to the Dial Plan Analysis Tables, how many codes are available in the system for activation / deactivation of features?
A. 2 Avaya 3100 Exam | EnsurePass.com
B. 3
C. 11
D. 21
Correct Answer: B
QUESTION 9
You have to add a new G650 Media Gateway to the system. Which command will perform this I A. add cabinet next
B. add port network next
C. add media ?gateway next
D. add G6SO-port next.
Correct Answer: C
QUESTION 10
Although not exactly the same, a bridged call appearance and a team button can perform some of the same functions. Avaya 3100 Exam | EnsurePass.com
Which statement correctly contrasts the team button and bridged call appearance?
A. The team button does not allow conferencing to an active call or speed dial to the monitored station.
B. The team button allows conferencing to an active call and making outgoing calls for the monitored station.
C. The bridged call appearance does not allow conferencing to an active call or speed dial to the mirrored station.
D. The bridged call appearance allows conferencing to an active call and making outgoing calls for the mirrored station.
Correct Answer: D
QUESTION 11
You need to configure a station so that when a department manager makes calls to employees the manager's calls will ring even though the called station might have Sent All Calls activated. Although the manager's station can be designated as a VIP telephone, the manger must be able to selectively activate this feature. Which feature addresses this need?
A. Button activated Executive Calling
B. FAC or button activated Automatic Inclusion
C. FAC or button activated Priority Calling
D. Button activated Send All Calls override
Correct Answer: C
QUESTION 12
Your customer has a communication Manager 6.0 branch location with SIP endpoints that need to survive a WAN failure when communication to the core or main Session Manager is unavailable. Which solution will provide survivability to the remote location?
A. an S8300 configured as an local survivable processor (LSP)
B. a simplex server configured as an enterprise survivable server (ESS)
C. an S8300 or simplex server configured as a Survivable Remote
D. an S8300 01 simplex server configured for high availability (HA)
Correct Answer: A
QUESTION 13
Avaya 3100 Exam | EnsurePass.com
Consider the settings shown in exhibit displayed by using the display route ?pattern command. You must deny calls from users in COR 10 to use route pattern 1. What should the fault restriction level (FRL) for COR 10 be?
A. 2
B. 3
C. 4
D. 5
E. 6
Correct Answer: A
QUESTION 14
With reference to the list trace station 1101 printout shown in the exhibit, what statement describes what happened during the time period of the trace?
A. Station 1101 called station, hung-up and finally called station 100.
B. Station 1101 called station 1000, the unanswered call went to the voicemail, and finally station 1101 called 1001.
C. Station 1101 called station 1000, and the station answered, then station 1000 transferred to call to station 1001.
D. Station 1101 called station 1000, unanswered; the call covered the station 1001.
Correct Answer: C QUESTION 15
Avaya 3100 Exam | EnsurePass.com
You are configuring Personal Station Access (PSA) and you configure the Communication Manager with the following settings:
-
Set TTI enabled = `Y'
-
Set PSA Associated code = `25' and disassociate code `#25'
-
Set security code for the station = `1234'
You activate the station by keying in FAC for PSA, station extension number, `#', the security code of the
station, and `#'. However, the station is not activated.
Which statement describes the issue to be addressed?
A. You need to set TTI = `n'
B. You did not enable PSA on the COS of the station.
C. You should not set the security code in sequential order.
D. You did not key in the correct activation sequence
Correct Answer: B QUESTION 16
Which statement most accurately describes the major difference between Automatic Alternative Rom (AAR) and Automatic Route Selection (ARS) in a typical installation?
A. AAR routes calls over a public network; ARS routes calls over a private network.
B. AAR routes calls over a private network; ARS routes calls over a public network.
C. AAR chooses routes automatically; ARS chooses routes according to pre programmed, best- choice parameters.
D. AAR chooses routes automatically; ARS chooses routes according to a manually administered route plan.
Correct Answer: B QUESTION 17
The monitor and display capacity commands can be used to get a real-time status of the system using
Avaya Site Administration (ASA).
Which command and tool should you use to view a summary of the overall condition of the system?
A. monitor system command using terminal emulation
B. monitor system command using GEDI
C. monitor status command using terminal emulation
D. display status using GEPI or terminal emulation
Correct Answer: A QUESTION 18
Which setting in the system parameter feature screen will enable TTI to be applicable to both analog and digital stations?
A. Terminal Trans. Init.? Y, TTI state = `voice', TTI enable = `y', TTI security code = `1709', CTI enabled = `n'.
B. Terminal Trans. Init.? Y, TTI state = `data', TTI enable = `y', TTI security code = `1709', CTI enabled Avaya 3100 Exam | EnsurePass.com = `y'.
C. Terminal Trans. Init.? Y, TTI state = `vdata', TTI enable = `y', TTI security code = `1709', CTI enabled = `n'.
D. Terminal Trans. Init.? Y, TTI state = `voice', TTI enable = `y', TTI security code = `1709', CTI enabled = `y'.
Correct Answer: D
QUESTION 19
Which user's does Call Park best serve?
A. users who travel domestically using smartphones for basic communication
B. users who need to pick up calls from any extension In the system when the call Is placed on hold
C. users who travel internationally using smartphones for basic communication
D. users who need to pick up calls from their smartphones while traveling
Correct Answer: B
QUESTION 20
Which statement most accurately describes the function of automatic call back feature?
A. It allows internal users who placed a call to a busy or unanswered external telephone to be called back when the called telephone becomes available.
B. It allows internal users who placed a call to a busy or unanswered internal telephone to be called back when the called telephone becomes available.
C. It allows internal users who are called when they are busy to activate a feature to automatically call back that second caller, once the first call is finished.
D. It allows internal users who are called when they are busy to place the second call on hold until the first call is finished.
Correct Answer: B Pass4isture 200-155 Dumps Free Demo Download: http://www.pass4itsure.com/200-155.html To check out more about Pass4isture 200-155 Dumps click here: http://www.janintraining.com/best-quality-microsoft-070-243-pdf/
Discount Pass4itsure 200-150 Dumps Preparation Materials, Real Pass4itsure 200-150 Exam Guaranteed Success, Pass DCICN Introducing Cisco Data Center Networking.
Exam Code: 200-150
Exam Name: DCICN Introducing Cisco Data Center Networking
Updated: May 30, 2017
Q&As: 60
Exam Information: http://www.pass4itsure.com/200-150.html
Pass4itsure Cisco Exam 200-150 Dumps Blog Series
QUESTION 11 The software contained in a software package can be installed by ________ or by ________. (Choose TWO.) A. using the following syntax on the command line: installer -pkg <package_name> -target <target_volume> B. opening the package contents and dragging the contents to / (root of the volume) C. expanding the package and dragging the contents to the applications folder D. double-clicking on the package to open it in the Installer application E. expanding the package and running the installer contained inside
Correct Answer: AD Section: (none) Explanation Explanation/Reference: QUESTION 12 When using Disk Utility to create a disk image from a model system volume, you need free space on your destination volume that is equal to ________. A. the data size on the source volume B. at least two times the data size on the source volume C. at least three times the data size on the source volume D. at least four times the data size on the source volume
Correct Answer: B Section: (none) Explanation Explanation/Reference: QUESTION 13 In Mac OS X v10.4, disk images provide ________. A. extra disk space for running BSD scripts B. a way to bring systems quickly back to a clean state C. a means of tracking changes made to startup volumes D. a means of compressing applications while they are being run
Correct Answer: B Section: (none)Explanation Explanation/Reference: QUESTION 14 A package receipt ________. A. stores license information B. contains information about an installed package C. stores an archive of the data files received from a package D. contains a list of packages installed within a set time parameter
Correct Answer: B Section: (none) Explanation Explanation/Reference: QUESTION 15 When installing a custom installation package, the resource script reflight runs after VolumeCheck and InstallationCheck, and ________. A. allows the user to select the destination volume B. verifies that the installation or upgrade can take place C. determines whether the installation is new or an upgrade D. runs before all other scripts for new installations and upgrades
Correct Answer: D Section: (none) Explanation Explanation/Reference: QUESTION 16 In Mac OS X v10.4, what information about an installed package do the .bom files contain? A. list of files installed by package, proper permissions for each file, file sizes, and file checksums B. file source locations, file sizes, target volume(s), and list of frameworks used during installation C. list of files installed by package, package creation and modification dates, user account authenticated for installation D. list of files installed by package, list of resource forks installed by package, list of source files in package, list of scripts run by package
Correct Answer: A Section: (none)Explanation Explanation/Reference: QUESTION 17 If you know the Open Firmware password for an Apple Macintosh computer, you can reset it by ________. A. clearing the parameter RAM (Command+Option+p+r at startup) B. changing the Master Password in the Security pane of System Preferences C. starting up the computer from the installation disc and using the Reset Password utility in the Installer D. starting up the computer into Open Firmware (Command+Option+o+f at startup) and using the reset commands
Correct Answer: D Section: (none)Explanation Explanation/Reference:
QUESTION 18 You have: -a FireWire drive with Mac OS X installed that contains a copy of a model disk image -a target computer that is currently started from its hard drive To deploy the model image to the target computer, plug the FireWire drive into the computer and ________. A. execute the asr command in Terminal, specifying the model image as the source, and the local hard drive as the target. B. restart from any external volume. Drag the model image from the FireWire drive to the local hard drive. When prompted, choose Restore. C. restart from the FireWire drive. Open Terminal and run the asr command, specifying the model image as the source, and the local hard drive as the target. D. shut down, then start up with the T key pressed. Once started, open Disk Utility and restore the model image as the source and the local hard drive as the target.
Correct Answer: C Section: (none)Explanation Explanation/Reference: QUESTION 19 You have an application that must be installed to / (root of the volume). However, you wish to install the application on a computer that is in Target Disk mode, and the target volume is in /Volumes. Identify a possible solution in Mac OS X v10.4. A. Copy the volume from /Volumes to /. B. Rename the target volume so that it matches the name of the root (/) volume. C. Identify the files that were installed during testing and create a custom installation package that installs the files in the correct locations. D. Create a disk image of the target volume, install the application, and restore the disk image to the target volume without erasing the existing contents.
Correct Answer: C Section: (none)Explanation Explanation/Reference: QUESTION 20 How can you prevent a user from starting a computer from a DVD, CD-ROM, or FireWire drive? A. Explicitly select a startup disk in System Preferences. B. Enable the open firmware password on the computer. C. Set up Classic to use a System Folder on a disk image. D. Format your designated startup disk without Mac OS 9 drivers.
Correct Answer: B Section: (none) Explanation Explanation/Reference: QUESTION 21 The System Image Utility ________. A. creates and scans an ASR-ready disk image B. prepares a disk image for NetBoot or Network Install C. configures an image to act as the default boot volume D. configures a computer to startup from a network image Correct Answer: B Section: (none) Explanation
Explanation/Reference: QUESTION 22 You are using ASR multicast to restore multiple computers with the same copy of an ASR-ready disk image. What will the result be? A. The restorations will be performed simultaneously. B. The restorations will be queued in the order requested. C. Users will be prompted to specify a data rate to use for their computer. D. The computers will start up from a network image and run asr automatically.
Correct Answer: A Section: (none) Explanation Explanation/Reference: QUESTION 23 Apple Remote Desktop is ________. A. an update service provided by Mac OS X Server B. a management tool used to control computers remotely C. an administrative tool used to install Mac OS X on remote systems D. the system preference for allowing remote Apple events in Mac OS X
Correct Answer: B Section: (none)Explanation Explanation/Reference: QUESTION 24 In a multiple-user environment, what action must you take to assure that a user's Classic preferences will be stored separately? A. No action is necessary. Classic automatically stores preferences in each user's home folder. B. Create an alias to the Classic Preferences folder in the Library folder in each user's home folder. C. Under the advanced tab in the Classic System Preferences pane, check use Mac OS 9 preferences from your home folder. D. In the Classic System Folder, create an alias to the Library/Preferences folder of each user's home folder and name the alias Preferences.name, where name is the username of that user.
Correct Answer: C Section: (none) Explanation Explanation/Reference: QUESTION 25 You have added packages to a custom Network Install image. To ensure that the packages are delivered to clients that start up from the image, you must ________. A. rename the primary package or metapackage on the install image to OSInstall.pkg B. create a metapackage named primary.mpkg that includes all of the added packages C. edit the file /private/etc/rc.cdrom.packagePath to contain the path to the main package or metapackage D. modify /private/etc/installconfig.xml on the disk image to point to the main install package or metapackage
Correct Answer: C Section: (none)Explanation Explanation/Reference:
The Most Recommended Pass4itsure 210-255 Dumps, Real Cisco 210-255 Dumps Test Software Is What You Need To Take, Pass Implementing Cisco Cybersecurity Operations.
QUESTION 1 Which TWO of the following features are available in the Aluminum PowerBook G4 models but not in the Titanium PowerBook G4 models? A. USB ports B. PCMCIA slot C. Built-in modem D. FireWire 800 port E. Built-in Bluetooth F. Built-in wireless networking
Correct Answer: DE QUESTION 2 Which of the following iBook or PowerBook models requires the use of the 65 watt AC power adapter? A. iBook G4 B. iBook G4 (14-inch) C. PowerBook G4 (DVI) D. PowerBook G4 (15-inch FW800)
Correct Answer: D QUESTION 3 Identify the correct procedure for starting up a PowerBook in Target Disk Mode? A. Press the D key during startup. B. Press the T key during startup. C. Press the Control and D keys during startup. D. Press the Control and T keys during startup. E. Press the Command and D keys during startup. F. Press the Command and T keys during startup.
Correct Answer: B QUESTION 4 Which THREE of the following 210-255 features are available in the Aluminum PowerBook G4 models but not in the iBook G4 models? A. USB ports B. Audio input C. PCMCIA slot D. Built-in modem E. Built-in Ethernet F. FireWire 800 port Correct Answer: BCF
QUESTION 5 Which of the following iBook or PowerBook models requires the use of the 65 watt AC power adapter? A. iBook (14-inch) B. iBook G4 (Early 2004) C. PowerBook G4 (12-inch) D. PowerBook G4 (1 GHz/867 MHz)
Correct Answer: D QUESTION 6 What function does Target Disk Mode perform? A. It enables direct connectivity with a remote Macintosh over the Internet. B. It converts a PC-formatted hard disk for use when connected to a Macintosh. C. It allows access to a Macintosh's internal hard disk from the Finder of a connected Macintosh via FireWire. D. It allows two external FireWire hard disk to be connected and transfer data directly between them without need of a computer.
Correct Answer: C QUESTION 7 A customer needs to transfer data from her PowerBook G4 (17-inch 1.5 GHz) for use on her Power Mac G5, but the PowerBook G4 (17-inch 1.5 GHz) fails to start up completely due to a video issue. Which of the following would most easily accomplish the data transfer? A. Remove the hard drive the PowerBook G4 (17-inch 1.5 GHz) and install it into the Power Mac G5. B. The PowerBook G4 (17-inch 1.5 GHz) will need to be repaired before any data can be recovered from it. C. Boot the PowerBook G4 (17-inch 1.5 GHz) into Mac OS X Safe Mode and connect the PowerBook G4 (17-inch 1.5 GHz) and Power Mac G5 with an Ethernet cable. D. Boot the PowerBook G4 (17-inch 1.5 GHz) into Target Disk Mode and connect the PowerBook G4 (17-inch 1.5 GHz) and Power MacG5 with a FireWire cable.
Correct Answer: D QUESTION 8 A Macintosh can startup from Mac OS X, but not from Mac OS 9. If you select the Mac OS 9 System Folder in the Startup Disk preference pane of Mac OS X, a flashing question mark appears on the screen when you restart the computer. What is one possible cause of this condition? A. The disk was reformatted using Disk Utility for Mac OS X, using the HFS Plus (extended) format instead of HFS format. B. The disk was reformatted using Disk Utility for Mac OS X, and option to install the Mac OS 9 drivers was not selected. C. The disk was reformatted using Disk Utility for Mac OS X, using the HFS format instead of HFS Plus (extended) format. D. This Macintosh does not support booting into Mac OS 9.
Correct Answer: B QUESTION 9 An iBook (G4) displays a flashing question mark at startup. Which step does Apple recommend you take FIRST? A. Reset Parameter RAM B. Try to startup from a bootable CD or DVD C. Reinitialize the hard disk rein stall the Mac OS D. Replace the internet hard drive with a known-good hard drive. Correct Answer: B QUESTION 10 You are replacing the logical board in a PowerBook G4 (12-inch 1 GHz). Which of the following special A. Torque screwdriver B. Nylon probe tool C. Spring tensioning tool D. Jumper adjustment tool
Correct Answer: B QUESTION 11 Which of the following Apple diagnostic utilities is the most appropriate for a service technician to test an iBook (G4)? A. Mac Test Pro B. Tech Tool Deluxe C. Apple Hardware Test D. Apple Service Diagnostic
Correct Answer: D QUESTION 12 A customer reports that her PowerBook G4 (DVI) shuts down intermittently - sometime immediately after startup. Which of the following is the FIRST step you should take to correct the issue? A. Reset PRAM. B. Rest the PMU. C. Disconnect all external peripherals. D. Check battery connection to the logic board
Correct Answer: C QUESTION 13 You are troubleshooting an PowerBook G4 system that has Mac OS X. The icon of a connected external FireWire drive is not appearing on the Finder Desktop. Which of the following would be MOST useful in troubleshooting this issue? A. Terminal B. Network Utility C. Process Viewer D. System Profiler E. Apple Hardware Test
Correct Answer: D QUESTION 14 Which of the following diagnostic utilities can be used by all customers to verify functionality of their own PowerBook and iBook? A. Mac Test Pro B. Apple Display Utility C. Apple Hardware Test D. Apple Service Diagnostic
Correct Answer: C QUESTION 15 A customer states that he cannot access the Internet on his iBook G4 using a dialup modem connection. Which of the following is most likely to be the problem? A. Apple Talk is not enabled on the iBook's modem port. B. The customer's iBook is not configured with a modem. C. The iBook is not running the latest version of Mac OS X. D. The telephone cable is plugged into the Ethernet jack.
Correct Answer: D 210-255 QUESTION 16 You are attempting to share between your iBook (Early 2004) and a friend's PC running Windows XP Professional. You have connected the two computers with an Ethernet cable, created a Mac OS X account to allow your friend still cannot access files on your iBook. Which of the following is most likely to be the problem? A. File Sharing must be enabled on the PC first. B. The file on your iBook must be converted to PC format first. C. The IP address settings on your iBook and the PC are not on the same network. D. You need to use an Ethernet crossover cable to connect the iBook and the PC.
Correct Answer: C QUESTION 17 A customer states that when an external antenna is connected to her AirPort Extreme Base Station, the external antenna does not appear in the Show Summary screen of AirPort Admin Utility. What is most likely the problem? A. The base station's firmware needs to be updated. B. The base station is malfunctioning and requires service. C. The base station needs to be powered down and restarted. D. The base station needs to be reconfigured to use the external antenna.
Correct Answer: C QUESTION 18 Which of the following are potential sources of interference with an AirPort Extreme network? (Select three) A. Wood B. Metal C. Microwave, oven D. Cellular telephone E. 2.4 GHz cordless telephone Correct Answer: BCE QUESTION 19 AirPort Extreme operates under which of the following IEEE standards? (Select two.) A. 802.11a B. 802.11b C. 802.11c D. 802.11g E. 802.11h F. 802.11i Correct Answer: BD QUESTION 20 To utilize Gigabit Ethernet, you must use an Ethernet cable with. A. tow wires (one pair) present. B. four wires (two pairs) present. C. six wires (three pairs) present. D. all eight wires (four pairs) present.
High Pass Rate Pass4itsure 210-250Dumps, Real Cisco 210-250Dumps Study Material Will Be More Popular, Pass Understanding Cisco Cybersecurity Fundamentals.
QUESTION 2
Sharing files over NFS is NOT secure because NFS _______.
A. relies on Kerberos
B. uses cleartext password
C. uses MAC address authentication
D. does not require user authentication
Correct Answer: D
QUESTION 3
From Server Admin, you can configure DHCP service in Mac OS X Server v10.3 to provide _________ to a requesting host machine. (Choose all that apply.)
A. a Host Name
B. an IP address
C. a MAC address
D. DNS settings
E. LDAP bindings
F. NetInfo bindings
Correct Answer: BDE
QUESTION 4
DNS service ________. (Choose THREE.)
A. maps domain names to IP addresses
B. maps IP addresses to domain names
C. leases IP addresses to client computers
D. tells users whether other clients are connected to the network
E. enables users to obtain domain names automatically, on a lease
F. lets users reference hosts using fully qualified domain names instead of IP addresses
Correct Answer: ABF
QUESTION 5
A client workstation is not receiving an IP address from its Mac OS X Server v10.3 DHCP service. What can explain this situation? (Choose THREE.)
A. DHCP service is not running.
B. No hard disk space is available on the client.
C. The server has more than one subnet configured.
D. The client machine is part of a computer account list.
E. All addresses In the applicable address range have been assigned.
F. The client is experiencing problems communicating with the DHCP server.
Correct Answer: AEF
QUESTION 6
Using Server Admin in Mac OS X Server v10.3, you can configure __________. (Choose all that apply.)
A. DNS zone info
B. AFP share points
C. Active Directory settings
D. DHCP lease renewal time
E. one or more valid DHCP subnets
F. NetInfoinformation that a DHCP server will provide
Correct Answer: ADE
QUESTION 7
When configuring DHCP service to provide IP addresses to clients, you MUST enter the ______. (Choose THREE.)
A. subnet mask
B. address range
C. router address
D. subnet category
E. DHCP client ID
Correct Answer: ABC
QUESTION 8
In Mac OS X Server, the DHCP client ID ____________.
A. authenticates the client to the DHCP server
B. lets the DHCP server identify the client's subnet
C. lets the DHCP server create an encryption key for the client
D. can provide additional information about the client to the administrator
Correct Answer: D
QUESTION 9
On your server that has Mac OS X Server v10.3, you configure a firewall that allows web service for the IP address range 10.1.7.6/24 only. Which THREE of these addresses will be DENIED access to the web server? (Choose THREE.)
A. 10.1.7.6
B. 10.2.7.6
C. 10.1.7.8
D. 10.1.9.6
E. 17.1.7.6
F. 10.1.7.24
Correct Answer: BDE
QUESTION 10
On your server that has Mac OS X Server v10.3, you configure a firewall that allows web service for the IP address range 10.1.1.6/16 only. Which of these addresses will be DENIED access to the web server? (Choose all that apply.)
A. 10.1.7.6
B. 10.2.7.6
C. 10.1.7.8
D. 10.1.9.6
E. 17.1.7.6
Correct Answer: EDBAC
QUESTION 11
Immediately after a successful installation of Mac OS X Server v10.3, which THREE directory configurations can you select in Server Assistant? (Choose THREE.)
A. NetInfor Parent
B. Standalone Server
C. Open Directory Replica
D. Open Directory Master
E. Active Directory Master
F. Connected to a Directory System
Correct Answer: BDF
QUESTION 12
Which three computers meet Apple's minimum requirements for installing Mac OS X Server v10.3? (Choose THREE.)
A. eMac / 128 MB RAM/ 6 GB available disk space
B. Xserve / 1 GB RAM / 12 GB available disk space
C. iBook G4 / 256 MB RAM / 6 GB available disk space
D. PowerBook g4 / 256 MB RAM / 2 GB available disk space
E. iMac (Flat Panel) / 384 MB RAM / 4 GB available disk space
F. iMac (Slot Loading) / 64 MB RAM / 6 GB available disk space
G. Power Mac g5 / 128 MB RAM / 3 GB available disk space
H. Power Mac 8500 with G3 processor upgrade / 256 MB RAM/ 5 GB available disk space
Correct Answer: ABE
QUESTION 13
When installing Mac OS X Server v10.3, on a remote computer from a local computer, what should you attempt to use as a password to gain access to the remote computer? (Choose TWO.)
A. 12345678
B. local computer's root password
C. remote computer's IP (Ipv4) address
D. any user-defined password present on the remote computer
E. first eight characters of the remote computer's serial number
Correct Answer: AE
QUESTION 14
When Mac OS X Server v10.3 is installed on an empty volume, the Server Assistant lets you_______. (Choose all that apply.)
A. configure share points
B. create new user and group accounts
C. install and configure Mac OS X Server on a remote computer
D. configure a Mac OS X Server computer to be a NetInfo parent
E. save configuration details in a file or directory services record
Correct Answer: CE
QUESTION 15
Using Open Directory you can __________.
A. enable virtual hosting
B. only authenticate kerberized services
C. manage access to domain name service
D. set up multiple LDAP domains on your network
E. configure Mac OS X Server v10.3 to provide group directory services
Buy Latest Pass4itsure 300-165 Dumps Questions And Answers, Real Pass4itsure 300-165 Dumps Are The Best Materials, Pass DCII Implementing Cisco Data Center Infrastructure (DCII).
Exam Code: 300-165
Exam Name: DCII Implementing Cisco Data Center Infrastructure (DCII)
Updated: May 30, 2017
Q&As: 102
Exam Information: http://www.pass4itsure.com/300-165.html
Pass4itsure Cisco Exam 300-165 Dumps Blog Series
QUESTION 42
When practicing component isolation, which ONE of the following components would NOT be a part of a minimal system configuration for a Power Mac G4 (Mirrored Doors)?
A. SDRAM
B. Speaker
C. Hard Drive
D. Logic Board
E. Power Cable
F. Power Supply
G. Front Panel Board
H. Processor with Heatsink
Correct Answer: C
QUESTION 43
The basis for the component isolation troubleshooting technique is an understanding of ______ within computers.
A. power flow
B. software data flow
C. firmware data flow
D. processor instruction flow
Correct Answer: A
QUESTION 44
When setting up a minimal system using the component isolation technique, you start with only the components necessary to_____.
A. Boot the system into Mac OS 9.
B. Boot the system into Mac OS X.
C. Boot the system into Open Firmware diagnostics.
D. Hear a boot chime and/or see a flashing question mark on a display.
Correct Answer: D
QUESTION 45
You are using component isolation to troubleshoot a Power Mac G4 (Quicksilver). You have already reduced the computer to the appropriate minimal configuration. You have just installed a known-good video card and have attached a known-good external VGA display to it. Upon startup, you see a flashing question mark on the VGA display, but you hear no startup chime. What signals or power could be missing to cause this problem?
A. Timing signals to the processor through the logic board.
B. Power to the memory subsystem through the logic board.
C. Backup battery voltage to the PMU through the logic board.
D. Audio signals to the speaker through the front panel board.
Correct Answer: D
QUESTION 46
What is the BEST way to properly ground an ESD workbench mat?
A. Attach the mat to the unit being serviced.
B. Connect the mat to a grounded electrical outlet.
C. Connect only the wriest strap and cord to a grounded electrical outlet.
D. Connect the wrist strap and cord only to the mat.
Correct Answer: B
QUESTION 47
What humidity level should be maintained to ensure an ESD-safe environment?
A. 25%-40%
B. 50%-75%
C. 75%-90%
D. 90%-100%
Correct Answer: C
QUESTION 48
Which FOUR of the following actions helps reduce the risk of damage from ESD? (Choose four)
A. Ground yourself and the equipment you are working on.
B. Always place ESD-sensitive components on metal surfaces.
C. Handle all ESD-sensitive boards by the connectors, not the edges.
D. Use static-shielding storage bags for ESD-sensitive components.
E. Do not bring plastic, vinyl, or foamed polystyrene near ESD-sensitive components.
Correct Answer: ABDE
QUESTION 49
Which of the following items are appropriate to use for ESD prevention? Select all that apply.
A. Metal work surface
B. CRT discharge tool
C. Grounded work mat
D. Wrist strap and cord
E. Static-shielding bags
Correct Answer: CDE
QUESTION 50
Which of the following is the most common example of electrostatic discharge?
A. You touch an object and feel a brief spark.
B. You see a bright flash on the CRT display of an eMac.
C. You plug a power cord into an outlet and you see a spark.
D. You hear a cracking noise coming from inside the computer.
Correct Answer: A
QUESTION 51
A customer states that her iMac (Flat Panel) display is constantly showing a bright all-white screen. You connect an external VGA display to the iMac (Flat Panel) and confirm that the problem is not with the operating system or the logic board. Based upon your knowledge of LCD display, what would be the most likely cause of this problem?
A. Failed LCD module
B. Failed power supply
C. Failed inverter board
D. Corrupt PMU
Correct Answer: A
QUESTION 52
Which TWO of the following statements about handling a CRT are true? (Choose two)
A. A discharged CRT can build up a secondary charge over time.
B. You should wear a grounding wrist strap or heel trap when discharging a CRT.
C. You must attach the discharge tool to ground before using it to discharge a CRT.
D. You should wear a grounding wrist strap or heel strap when performing live adjustments.
E. You must disconnect the power cord and discharge the CRT before performing live adjustments.
Correct Answer: AC
QUESTION 53
Why do you need to take precautions when disposing of damages CRT displays? (Select two.)
A. CRT displays may contain toxic waste.
B. CRT displays may present a fire hazard.
C. CRT displays may implode if mishandled.
D. CRT displays may present a radiation hazard.
E. CRT displays may contain hazardous materials.
Correct Answer: CE
QUESTION 54
What precautions should be taken if an discharged CRT must remain exposed for any length of time?
A. You should reset the Power Manager Unit on the logic board.
B. You should perform a full set of video adjustments on the CRT.
C. You should remove the CRT from the computer or display assembly.
D. You should establish an ongoing lead between the CRT anode and ground. Correct Answer: D
Download Cisco Pass4itsure 010-151 Dumps Study, Real Cisco 010-151 Dumps Practice Questions Online Store, Pass Cisco Certified Technician (CCT) for Data Center.
Exam Code: 010-151 Exam Name: Cisco Certified Technician (CCT) for Data Center Updated: May 25, 2017 Q&As: 72
Exam Information: http://www.pass4itsure.com/010-151.html
Cisco Exam Pass4itsure 010-151 Dumps Blog Series
QUESTION 44 The Display Adjustment Utility adjusts geometry on which of the following products? A. eMac B. iMac G3 C. Apple Studio Display 17 (17" LCD ADC) D. Apple Cinema HD Display (23" LCD ADC)
Correct Answer: B QUESTION 45 This screen image indicates a ___________ maladjustment.
A. keystone B. pincushion C. parallelogram D. corner curvature
Correct Answer: A QUESTION 46 What is the BEST way to properly ground an ESD workbench mat? A. Attach the mat to the unit being serviced. B. Connect the mat to a grounded electrical outlet. C. Connect only the wrist strap and cord to a grounded electrical outlet. D. Connect the wrist strap and cord only to the mat.
Correct Answer: B QUESTION 47 What humidity level should be maintained to ensure an ESD-safe environment? A. 25%-40% B. 50%-75% C. 70%-90% D. 90%-100%
Correct Answer: C QUESTION 48 Which of the following is the most common example of electrostatic discharge? A. You touch an object and feel a brief spark. B. You see a bright flash on the CRT display of an eMac. C. You plug a power cord into an outlet and you see a spark. D. You hear a crackling noise coming from inside the computer. Correct Answer: A QUESTION 49 Which of the following items are appropriate to use for ESD prevention? A. Metal work surface B. CRT discharge tool C. Grounded work mat D. Wrist strap and cord E. Static-shielding bags Correct Answer: CDE QUESTION 50 Which FOUR of the following actions helps reduce the risk of damage from ESD? A. Ground yourself and the equipment you are working on. B. Always place ESD-sensitive components on metal surfaces. C. Handle all ESD-sensitive boards by the connectors, not the edges. D. Use static-shielding storage bags for ESD-sensitive components. E. Do not touch anyone who is working on ESD-sensitive components. F. Do not bring plastic, vinyl, or foamed polystyrene near ESD-sensitive components.
Correct Answer: ADEF QUESTION 51 Which part or parts of an eMac should NOT be touched until after the display is disconnected from its power source and the CRT is properly discharged? A. Anode cap B. Yoke assembly C. Flyback transformer D. Front of CRT display E. Yoke cable/connector F. Outer plastic housing
Correct Answer: ABCE QUESTION 52 When discharging a CRT, what part do you touch with the tip of the discharge tool? A. anode aperture B. high voltage cable C. Flyback transformer D. yoke connector/cable
Correct Answer: A QUESTION 53 Which TWO of the following statements about handling a CRT are true? A. A discharged CRT can build up a secondary charge over time. B. You should wear a grounding wrist strap or heel strap when discharging a CRT. C. You must attach the discharge tool to ground before using it to discharge a CRT. D. You should wear a grounding wrist strap or heel strap when performing live adjustments. E. You must disconnect the power cord and discharge the CRT before performing live adjustments. Correct Answer: AC QUESTION 54 Why do you need to take precautions when disposing of damaged CRT displays? A. CRT displays may contain toxic gases. B. CRT displays may present a fire hazard. C. CRT displays may implode if mishandled. D. CRT displays may present a radiation hazard. E. CRT displays may contain hazardous materials. Correct Answer: CE QUESTION 55 What precautions should be taken if a discharged CRT must remain exposed for any length of time? A. You should reset the Power Manager Unit on the logic board. B. You should perform a full set of video adjustments on the CRT. C. You should remove the CRT from the computer or display assembly. D. You should establish an ongoing lead between the CRT anode and ground.
Correct Answer: D QUESTION 56 When making LIVE adjustments to a CRT display, you should make sure that _____ A. you are NOT grounded B. the CRT has been discharged C. the yoke wires have been disconnected D. you use an ungrounded electrical outlet E. the equipment is properly connected and grounded F. your building's electrical outlets are properly wired and grounded
Correct Answer: AEF QUESTION 57 Which of the following do you use when discharging a CRT? A. light meter B. safety glasses C. grounded ESD mat D. CRT discharge tool E. jumper adjustment tool
Correct Answer: BD QUESTION 58 Which of the following is a hazardous area due to high voltage even when an eMac is unplugged? A. Anode cap B. Hard drive C. Logic board D. Optical drive
