Exam Code: 010-151
Exam Name: Cisco Certified Technician (CCT) for Data Center
Updated: May 25, 2017
Q&As: 72
Exam Information: http://www.pass4itsure.com/010-151.html
Cisco Exam Pass4itsure 010-151 Dumps Blog Series
QUESTION 44The Display Adjustment Utility adjusts geometry on which of the following products?
A. eMac
B. iMac G3
C. Apple Studio Display 17 (17" LCD ADC)
D. Apple Cinema HD Display (23" LCD ADC)
Correct Answer: B
QUESTION 45
This screen image indicates a ___________ maladjustment.
A. keystone
B. pincushion
C. parallelogram
D. corner curvature
Correct Answer: A
QUESTION 46
What is the BEST way to properly ground an ESD workbench mat?
A. Attach the mat to the unit being serviced.
B. Connect the mat to a grounded electrical outlet.
C. Connect only the wrist strap and cord to a grounded electrical outlet.
D. Connect the wrist strap and cord only to the mat.
Correct Answer: B
QUESTION 47
What humidity level should be maintained to ensure an ESD-safe environment?
A. 25%-40%
B. 50%-75%
C. 70%-90%
D. 90%-100%
Correct Answer: C
QUESTION 48
Which of the following is the most common example of electrostatic discharge?
A. You touch an object and feel a brief spark.
B. You see a bright flash on the CRT display of an eMac.
C. You plug a power cord into an outlet and you see a spark.
D. You hear a crackling noise coming from inside the computer.
Correct Answer: A
QUESTION 49
Which of the following items are appropriate to use for ESD prevention?
A. Metal work surface
B. CRT discharge tool
C. Grounded work mat
D. Wrist strap and cord
E. Static-shielding bags
Correct Answer: CDE
QUESTION 50
Which FOUR of the following actions helps reduce the risk of damage from ESD?
A. Ground yourself and the equipment you are working on.
B. Always place ESD-sensitive components on metal surfaces.
C. Handle all ESD-sensitive boards by the connectors, not the edges.
D. Use static-shielding storage bags for ESD-sensitive components.
E. Do not touch anyone who is working on ESD-sensitive components.
F. Do not bring plastic, vinyl, or foamed polystyrene near ESD-sensitive components.
Correct Answer: ADEF
QUESTION 51
Which part or parts of an eMac should NOT be touched until after the display is disconnected from its power source and the CRT is properly discharged?
A. Anode cap
B. Yoke assembly
C. Flyback transformer
D. Front of CRT display
E. Yoke cable/connector
F. Outer plastic housing
Correct Answer: ABCE
QUESTION 52
When discharging a CRT, what part do you touch with the tip of the discharge tool?
A. anode aperture
B. high voltage cable
C. Flyback transformer
D. yoke connector/cable
Correct Answer: A
QUESTION 53
Which TWO of the following statements about handling a CRT are true?
A. A discharged CRT can build up a secondary charge over time.
B. You should wear a grounding wrist strap or heel strap when discharging a CRT.
C. You must attach the discharge tool to ground before using it to discharge a CRT.
D. You should wear a grounding wrist strap or heel strap when performing live adjustments.
E. You must disconnect the power cord and discharge the CRT before performing live adjustments.
Correct Answer: AC
QUESTION 54
Why do you need to take precautions when disposing of damaged CRT displays?
A. CRT displays may contain toxic gases.
B. CRT displays may present a fire hazard.
C. CRT displays may implode if mishandled.
D. CRT displays may present a radiation hazard.
E. CRT displays may contain hazardous materials.
Correct Answer: CE
QUESTION 55
What precautions should be taken if a discharged CRT must remain exposed for any length of time?
A. You should reset the Power Manager Unit on the logic board.
B. You should perform a full set of video adjustments on the CRT.
C. You should remove the CRT from the computer or display assembly.
D. You should establish an ongoing lead between the CRT anode and ground.
Correct Answer: D
QUESTION 56
When making LIVE adjustments to a CRT display, you should make sure that _____
A. you are NOT grounded
B. the CRT has been discharged
C. the yoke wires have been disconnected
D. you use an ungrounded electrical outlet
E. the equipment is properly connected and grounded
F. your building's electrical outlets are properly wired and grounded
Correct Answer: AEF
QUESTION 57
Which of the following do you use when discharging a CRT?
A. light meter
B. safety glasses
C. grounded ESD mat
D. CRT discharge tool
E. jumper adjustment tool
Correct Answer: BD
QUESTION 58
Which of the following is a hazardous area due to high voltage even when an eMac is unplugged?
A. Anode cap
B. Hard drive
C. Logic board
D. Optical drive
Correct Answer: A Pass4itsure 010-151 Dumps Free Demo Download: http://www.pass4itsure.com/010-151.html
To check out more about Pass4itsure 010-151 dumps click here: http://www.easyhometraining.com/high-success-rate-cisco-010-151-dumps/
No comments:
Post a Comment