[FREE] Cisco 200-601 Dumps, Best 200-601 Dumps Pdf

Get the newest exam questions for Managing Industrial Networking for Manufacturing with Cisco Technologies 200-601. https://www.pass4itsure.com/200-601.html 200-601 dumps!

200-601 IMINS2 - Cisco
The 200-601 IMINS2 exam tests concepts and technology commonly found in the automated manufacturing environment.

Cisco 200-601 Certification Exam Questions and Answers

QUESTION 1
Refer to the exhibit.

NAT has been configured on the router \\'GW\\' and the IP addresses of router \\'GW\\' have been configured properly.
Users of PC1 and PC2 are able to ping the IP address 198.51.100.1 but are unable to reach any other IP addresses on
the Internet. The ISP confirmed that their configuration is correct. Which option would likely correct the problem?
A. ip access-list extended ACL_OUTBOUND permit ip 10.1.1.0 0.0.0.255 any interface Ethernet1 ip access-group
ACL_OUTBOUND out
B. interface Ethernet1 ip nat outside
C. interface Ethernet0 ip nat inside
D. ip route 0.0.0.0 0.0.0.0 198.51.100.1
Correct Answer: D

QUESTION 2
EtherNet/IP is an Ethernet implementation of which protocol?
A. CIP
B. Industrial Protocol
C. DeviceNet
D. ControlNet
Correct Answer: A

QUESTION 3
You have reached the limit of IPv4 IGMP groups available on a Cisco IE 3000 switch that was deployed using the
Express Setup. Which CLI command will increase the number of available IPv4 IGMP groups and multicast routes from
256 to 1000 on this switch?
A. switch(config)#sdm prefer routing
B. switch(config)#sdm prefer vlan igmp
C. switch(config)#sdm prefer routing igmp
D. switch(config)#sdm prefer vlan
Correct Answer: A

QUESTION 4
Refer to the exhibit. The Robot Cell is in a bottling plant. This cell environment needs to consider high flex, EMI, and
possible exposure to moisture. Which physical media components need to be considered to prevent network
degradation or interruptions?

A. Stranded, shielded wire with an industrial jacket and M12 connectors
B. Solid, unshielded commercial jacket wire, and M12 connectors
C. Stranded, unshielded wire with an industrial jacket, and commercial grade RJ45 connectors
D. Solid, shielded wire with commercial grade jacket, and commercial grade RJ45 connectors
Correct Answer: A

QUESTION 5
A cookie cutter machine requires 2 standard controllers and a safety controller. All of these controllers and machine
level I/O have been placed on VLAN 104. Both standard controllers must monitor a photocell on this machine. Which IP
address is used to transfer this status information?
A. 10.17.104.16
B. 192.168.1.16
C. 239.192.3.16
D. 239.192.254.16
Correct Answer: C

Best 200-601 Dumps Pdf 2020

Cisco 200-601 Dumps Pdf Free https://drive.google.com/file/d/1VQw73wW_EslWHZwDvQSlQ7HretXv9XDU/view?usp=sharing

200-601 imins2 dump | discount code 2020

Get up-to-date real exam questions for 200-601 dump https://www.pass4itsure.com/200-601.html Access online the Q&A and get ready for the test.