Before you start preparing an 300-208 exam
Why are you giving an 300-080 exam?
The 300-208 exam provides a controlled environment for independent work and is therefore often used to validate candidates' learning.300-208 Exams can be great motivators.
What are the qualities of a good 300-208 exam?
- Don't panic.
most important exam in your life, but if you run around like a headless chicken, you will have nothing to do.
- Be prepared
Take the latest 300-208 exam dump to prepare for the 300-208 issue. Practice more.
- Get rid of fun distractions
Do what you have to concentrate on. Put the phone in another room. Turn off Wi-Fi.
Hw to test it?
The entire 300-208 exam should be consistent with your learning outcomes for the course.
- Use the list of topics available in the syllabus
- Browse your handouts to find key concepts and methods
- Review the chapter headings and subtitles in the specified reading
Get latest updated 300-080 Dumps | free
Why I am suggesting you Pass4itsure for 300-208 preparation?
Pass4itsure is completely different from everyone else, just because of their special resources. They can offer you:
Best learning sources for 300-208 exam
Most Up to Date 300-208 Exam Dumps
Typically, IT professionals access Pass4itsure to prepare for IT certification because they have an updated 300-208 exam dump that has been certified by Cisco professionals.
300-208 exam questions with precise answers
The 300-208 exam questions provided by Pass4itsure cover all 300-208 goals, and the demand for these 300-208 exam questions from Pass4itsure is increasing. For those who want to pass 300-208 in their first attempt, it will be the best.
300-208 PDF Questions with Verified 300-208 Answers
QUESTION 1
CORRECT TEXT
The Secure-X company has started to tested the 802.1X authentication deployment using the Cisco Catalyst 3560-X
layer 3 switch and the Cisco ISEvl2 appliance. Each employee desktop will be connected to the 802.1X enabled switch
port and will use the Cisco AnyConnect NAM 802.1X supplicant to log in and connect to the network. Your particular
tasks in this simulation are to create a new identity source sequence named AD_internal which will first use the
Microsoft Active Directory (AD1) then use the ISE Internal User database. Once the new identity source sequence
has been configured, edit the existing DotlX authentication policy to use the new AD_internal identity source sequence.
The Microsoft Active Directory (AD1) identity store has already been successfully configured, you just need to reference
it in your configuration.
In addition to the above, you are also tasked to edit the IT users authorization policy so IT users who successfully
authenticated will get the permission of the existing IT_Corp authorization profile.
Perform this simulation by accessing the ISE GUI to perform the following tasks:
Create a new identity source sequence named AD_internal to first use the Microsoft Active Directory (AD1) then use the
ISE Internal User database
Edit the existing Dot1X authentication policy to use the new AD_internal identity source sequence:
If authentication failed-reject the access request
If user is not found in AD-Drop the request without sending a response
If process failed-Drop the request without sending a response
Edit the IT users authorization policy so IT users who successfully authenticated will get the permission of the existing
IT_Corp authorization profile.
To access the ISE GUI, click the ISE icon in the topology diagram. To verify your configurations, from the ISE GUI, you
should also see the Authentication Succeeded event for the it1 user after you have successfully defined the DotlX
authentication policy to use the Microsoft Active Directory first then use the ISE Internal User Database to authenticate
the user. And in the Authentication Succeeded event, you should see the IT_Corp authorization profile being applied to
the it1 user. If your configuration is not correct and ISE can\\'t authenticate the user against the Microsoft Active
Directory, you should see the Authentication Failed event instead for the it1 user.
Note: If you make a mistake in the Identity Source Sequence configuration, please delete the Identity Source Sequence then re-add a new one. The edit Identity Source Sequence function is not implemented in this simulation.
Correct Answer: Review the for full configuration and solution.
Step 1: create a new identity source sequence named AD_internal which will first use the Microsoft Active Directory
(AD1) then use the ISE Internal User database as shown below:
Step 1: create a new identity source sequence named AD_internal which will first use the Microsoft Active Directory
(AD1) then use the ISE Internal User database as shown below:
QUESTION 2
CORRECT TEXT
The Secure-X company has recently successfully tested the 802.1X authentication deployment using the Cisco Catalyst
switch and the Cisco ISEv1.2 appliance. Currently, each employee desktop is connected to an 802.1X enabled switch
port and is able to use the Cisco AnyConnect NAM 802.1Xsupplicantto log in and connect to the network.
Currently, a new testing requirement is to add a network printer to the Fa0/19 switch port and have it connect to the
network. The network printer does not support 802.1X supplicant. The Fa0/19 switch port is now configured to use
802.1X
authentication only.
To support this network printer, the Fa0/19 switch port configuration needs to be edited to enable the network printer to
authenticate using its MAC address. The network printer should also be on VLAN 9.
Another network security engineer responsible for managing the Cisco ISE has already per-configured all the
requirements on the Cisco ISE, including adding the network printer MAC address to the Cisco ISE endpoint database
and etc...
Your task in the simulation is to access the Cisco Catalyst Switch console then use the CLI
to:
Enable only the Cisco Catalyst Switch Fa0/19 switch port to authenticate the network printer using its MAC address
and:
Ensure that MAC address authentication processing is not delayed until 802.1Xfails
Ensure that even if MAC address authentication passes, the switch will still perform 802.1X authentication if requested
by a 802.1X supplicant
Use the required show command to verify the MAC address authentication on the Fa0/19 is successful
The switch enable password is Cisco For the purpose of the simulation, to test the network printer, assume the network
printer will be unplugged then plugged back into the Fa0/19 switch port after you have finished the required
configurations on the Fa0/19 switch port. Note: For this simulation, you will not need and do not have access to the ISE
GUI To access the switch CLI, click the Switch icon in the topology diagram
Correct Answer: Review the for full configuration and solution.
Initial configuration for fa 0/19 that is already done:
Initial configuration for fa 0/19 that is already done:
goal stated in the question. To do this we simply need to add this command under the interface:
mab
Then do a shut/no shut on the interface.
Verification:
QUESTION 3
Drag and drop the portals from the left onto the correct portal tasks on the right.
Select and Place:
= Provide a posture assessment for a device My Devices = Register a lost device Blacklist = Remove a device
Pass4itsure have verified and updated Cisco 300-208 exam questions & answers with easy to use 300-208 dumps pdf. In that case you can easily get professional certified with full certainty at first endeavor.Go https://www.pass4itsure.com/300-208.html.
No comments:
Post a Comment